Categories
Cart 0 items
Your cart is empty
HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154
This is the HPI Racing RTR Sprint 2 Drift with the Nissan 350Z Body.






Features:
Chassis: 3/16" (4mm) plastic
Drive: Four wheel belt drive
Motor: 15 turn Firebolt, brushed
Radio: HPI TF-40 2.4GHz with waterproof steering servo and waterproof receiver box
Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof and reversible
Battery: 7.2V 2000mAh
Battery Charger: AC wall type
Ball Bearings: Full set included
Shocks: Oil-filled, plastic bodied, with special springs for drifting
Differentials: Planetary gear
Transmission: Single speed
Tires: Falken Azenis hard compound drift type X-pattern, 1" (26mm) wide, 2.5" (65mm) outer diameter
Wheels: Officially licensed TE37 Rays/Volk design 5-spoke brown on color, outer diameter 1.9" (48mm), width 1" (26mm), 3mm offset in front and 6mm offset in rear for wide look seen on full-size drift cars
Pinion Gear: 48 pitch steel
Spur Gear: 48 pitch, 87 tooth, composite construction
Body: Painted and trimmed Nissan 350Z
Bumpers: Front, foam
Suspension: Fully adjustable
Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

The RTR Sprint 2 Drift is now better than ever! HPI has taken the proven Sprint 2 platform and added a 2.4GHz radio system, pre-painted bodies, waterproof electronics, LIPO-capable electronic speed control, 7.2V battery pack with AC wall charger, AA batteries for the transmitter, and orange anodized chassis parts. And it's all pre-built to precise factory specs to get you drifting quickly.

Includes: HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body, motor, electronic speed control, clear body, tires, foam inserts, wheels, 2000mAh battery, wall charger, radio batteries pinion gear, 87 tooth spur gear, 2.4GHz radio, servo, two decal sheets, and instructions

Requires: Building and track equipment

Vehicle
Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (194mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31" (8mm)

Body
Length: 16.5" (419mm)
Width: 7.7" (195mm) at rear wheels (widest point)
Width: 7.1" (180mm) behind from wheels (thinnest point)=
Height: 5" (127mm)
Product 244/1002
 Previous   Return to the Product List   Next 

HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154

HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154 This is the HPI Racing RTR Sprint 2 Drift with the Nissan 350Z Body. Features: Chassis: 3/16" (4mm) plastic Drive: Four wheel belt drive Motor: 15 turn Firebolt, brushed Radio: HPI TF-40 2.4GHz with waterproof steering s...
in Stock
$129.00